Free visual inspection and a written scope of work before any mitigation begins - photos, moisture readings, and drying logs go in your claim file
The scope we write is the scope we bill. Anything new gets shown to you, in writing, before we touch it.
Before
After
Before
After
Before
AfterFast, Reliable Mold Remediation Across Inglewood
Mold remediation in Inglewood typically costs $1,800-$6,500 for a standard residential job, with inspection and testing running $350-$650 and full containment-based removal starting around $2,400 for a contained room. Most Inglewood homeowners see us on-site within 60-90 minutes of calling (213) 699-3658, with crews dispatched from our Los Angeles office and routed directly to Inglewood neighborhoods from Century Boulevard to the blocks east of the Forum.
We’re familiar with what hides behind Inglewood’s 1940s-1960s stucco walls. The post-war bungalows and courtyard apartments that dominate this city carry decades of concealed slow leaks, original galvanized plumbing, and single-ply flat roofs that pond water until the marine layer finishes the job. Our Mold Remediation team documents every moisture reading, every photo, every written scope - because we’ve seen what happens when a restoration invoice lands on an adjuster’s desk without the paperwork to support it.
Why DryMark Restoration Manhattan Beach Is Inglewood’s Preferred Mold Remediation Company
Inglewood homeowners don’t hire us for promises. They hire us for what we can show them.
Our reputation here is built on documentation. Every job since 2011 has started with a written price before any work begins - Haven Standard, Clause 1 - and ended with a photo record, a drying log, and a signed 365-Day Done Right Promise. We’ve restored 12,000+ homes, and not one started without that written scope. Bring a competitor’s written estimate and we’ll review it free - no charge, no obligation.
Calls to (213) 699-3658 reach a live person, 24 hours a day, 7 days a week. No voicemail trees. No next-business-day callbacks while moisture is still moving through your walls.
Our crews know Inglewood’s specific risks. The Newport-Inglewood Fault runs directly beneath this city - Inglewood is literally named on this fault - and the micro-seismic creep opens hairline cracks in 1950s slab-on-grade foundations that let groundwater wick for years before anyone notices. Three miles from the coast, the marine layer keeps overnight humidity high enough that even minor water intrusion sustains active mold colonization within days. We don’t guess at these conditions. We measure them, document them, and build our remediation plan around them.
Our Mold Remediation Services in Inglewood
Mold Inspection & Testing
A proper mold inspection in Inglewood starts with a concrete crack map, not just a visual sweep. We moisture-map slab edges, wall cavities, and ceiling decks - especially critical in the post-war housing stock near Hollywood Park and Century Boulevard, where Newport-Inglewood Fault creep has been opening foundation cracks for decades. Air and surface samples go to a third-party lab. You get the lab report, the moisture readings, and a written scope with a fixed price before any remediation starts. Typical inspection and testing in Inglewood runs $350-$650.
Mold Removal
Our removal protocol follows IICRC S520 standards: containment with 6-mil poly sheeting, negative air pressure, HEPA filtration, and controlled demolition of non-salvageable materials. In Inglewood’s 1950s bungalows, we frequently find original asbestos-containing floor tile or joint compound that must be abated before restoration proceeds - a complication we flag in the initial scope, not as a mid-job surprise. Removal pricing for a single contained room typically starts at $2,400 and ranges to $4,800 depending on affected square footage and material classification.
Black Mold Remediation
Stachybotrys and other toxigenic species require the same containment rigor as any mold job, with additional attention to spore dispersal control. In Inglewood, black mold often signals a long-term moisture source - the slab crack that won’t stop wicking, the flat roof that ponds, the pinhole in original galvanized pipe - and we won’t close containment until we’ve identified and addressed that source in writing. Black mold remediation in Inglewood typically runs $3,200-$6,500.
Air Quality Restoration
Post-remediation, we run HEPA air scrubbers and verify clearance through third-party air sampling. In Inglewood’s marine layer environment, we also evaluate whether your HVAC system is contributing to humidity load - coastal air handlers work harder here, and poorly maintained systems can reintroduce moisture faster than natural ventilation removes it. Air quality restoration as a standalone service runs $800-$1,800; as part of a full remediation, it’s integrated into the scope.
Crawl Space Treatment
Many Inglewood stucco bungalows have shallow crawl spaces or perimeter foundations with limited access. We deploy Injectidry floor mats and targeted drying systems to reach these cavities without destructive demolition where possible. Vapor barrier installation and dehumidifier placement follow, with moisture readings documented to IICRC standards. Crawl space treatment in Inglewood typically ranges $1,800-$3,600.
Moisture & Humidity Control
The marine layer doesn’t take nights off. We specify and install permanent dehumidification for Inglewood homes with chronic humidity issues - especially relevant for courtyard apartments and slab-on-grade bungalows where foundation cracks create ongoing vapor drive. Our systems are sized to the space, not oversold, with psychrometric data (temperature, relative humidity, vapor pressure differential) documented before and after installation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Inglewood
Our equipment inventory includes professional-grade drying systems from Dri-Eaz, Phoenix, and B-Air, with Injectidry systems reserved for the targeted cavity drying that Inglewood’s stucco construction often demands. We don’t rent equipment by the job - we own it, maintain it, and document its performance on every drying log. All work is documented to IICRC, RIA, and IFA standards, producing the daily moisture readings that turn restoration invoices into claims insurers pay without extended review.
Common Mold Remediation Problems We See in Inglewood Homes
- Treating visible mold without addressing the Newport-Inglewood slab crack. We regularly open walls in bungalows near Century Boulevard and find the bottom plate saturated from groundwater wicking through a hairline foundation crack. Clean the drywall, and regrowth starts inside 90 days. Our scopes include concrete crack mapping and moisture tracing to the source.
- Assuming the marine layer will dry things out overnight. It won’t. Summer overnight humidity in Inglewood routinely stays above 70% RH. Without aggressive dehumidification and air movers, Category 2 water becomes Category 3 within 48 hours - and Category 3 water triggers mandatory removal of porous materials under IICRC standards.
- Skipping moisture mapping of flat roof ponding areas. The built-up and single-ply roofs on Inglewood’s apartment buildings and commercial strips pond water until Santa Ana wind events drive it through compromised decking. Ceiling mold returns after the first rain if the deck wasn’t dried to pre-loss condition - we verify with pinless moisture meters and document the readings.
- Renovation-triggered discoveries of asbestos-containing materials. Rapid gentrification pressure since the SoFi Stadium announcement means crews routinely open walls and find original asbestos floor tile, joint compound, or mastic that must be abated before any mold remediation proceeds. We test before we cut, and we build abatement into the written scope when needed.
Pricing for Mold Remediation in Inglewood, CA
| Service | Typical Range in Inglewood |
|---|---|
| Mold Inspection & Testing | $350 - $650 |
| Contained Room Removal (IICRC S520) | $2,400 - $4,800 |
| Black Mold / Toxigenic Species Remediation | $3,200 - $6,500 |
| Crawl Space Treatment | $1,800 - $3,600 |
| Air Quality Restoration (standalone) | $800 - $1,800 |
| Moisture & Humidity Control System | $1,200 - $2,800 |
What moves a job to the higher end: asbestos abatement requirements, extensive containment for occupied spaces, secondary damage to original hardwood or plaster, and the structural repairs that follow long-term slab crack moisture intrusion. What keeps it lower: early detection, contained area, and no complicating material hazards.
Every price is written and signed before work begins - Haven Standard, Clause 1. No scope-creep additions once the crew is inside. Call (213) 699-3658 for a free estimate with exact pricing for your property.
We Also Serve Cities Near Inglewood
Our crews respond throughout the Westside and South Bay corridor. We provide Mold Remediation in Inglewood and surrounding communities including Hawthorne, Culver City, Lawndale, and Playa del Rey. Dispatch is coordinated from our Los Angeles office; response times to these neighboring cities typically fall within the same 60-90 minute window as Inglewood proper.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Mold Remediation in Inglewood
Because surface cleaning doesn’t stop the groundwater wicking through Newport-Inglewood Fault slab cracks that keeps the bottom plate at 15-20% moisture content. Our techs were called to a 1952 stucco bungalow off Crenshaw Boulevard just south of Century, where a homeowner’s renovation exposed black mold across the bottom plate of a bedroom wall. Moisture mapping showed the slab under the original oak floor was still wicking groundwater through a hairline fault crack, keeping the cavity at 18% MC even though the visible drywall felt dry. We set containment with 6-mil poly, ran HEPA air scrubbers and a Phoenix dehumidifier with Injectidry floor mats for 5 days, applied antimicrobial treatment, then re-tested - clearance passed and the homeowner learned to watch that slab edge every winter. Call (213) 699-3658 if you’re seeing repeat growth; we’ll map the moisture source and quote remediation in writing.
Significantly faster. Inglewood’s marine layer positioning - roughly three miles from the coast - keeps overnight relative humidity routinely above 70% even in summer. A pinhole supply-line leak can sustain active colonization in under 48 hours, where inland cities with drier nights might see 72-96 hours before visible growth. That compressed timeline makes aggressive drying, not just water extraction, the critical first response. We deploy Phoenix dehumidifiers and B-Air air movers with documented psychrometric targets, not guesswork. Call (213) 699-3658 for immediate dispatch.
Yes, and for two Inglewood-specific reasons. First, the Hollywood Park/SoFi Stadium megadevelopment brought years of heavy ground dewatering and vibration to surrounding residential blocks, accelerating settlement and moisture intrusion in aging structures - testing establishes whether you’re dealing with recent water damage or long-term groundwater wicking. Second, many courtyard apartments in this area carry original asbestos-containing materials that must be identified before containment demolition begins. Our inspection includes both third-party mold sampling and asbestos screening where indicated, with results built into the written scope. Testing runs $350-$650; call (213) 699-3658 to schedule.
Shallow crawl spaces or perimeter foundations get Injectidry floor mats for targeted cavity drying, followed by vapor barrier installation and permanent dehumidifier sizing based on actual cubic footage and vapor pressure differential - the measurable force that drives moisture through concrete and into your framing. In Inglewood’s marine layer climate, we typically specify dehumidifiers rated for coastal conditions, not standard inland units. Treatment ranges $1,800-$3,600 depending on access difficulty and square footage. Every step is photo-documented and logged to IICRC standards. Call (213) 699-3658 for a written scope.
We test, not guess. Category 1 is clean water from a supply line; Category 2 carries contaminants and requires antimicrobial treatment; Category 3 is grossly contaminated and mandates removal of porous materials. In Inglewood, the marine layer’s high humidity accelerates Category 2 degradation to Category 3 within 48 hours - a timeline we verify with moisture content readings and microbial sampling, not visual inspection alone. The Haven Standard requires we classify water in writing before specifying remediation scope, so you know exactly what you’re paying for and why. Call (213) 699-3658 for documentation on your specific loss.
Written by Alicia Brennan, Owner at Back to Dry Restoration, serving Inglewood since 2011.